Communications Fallback
Communications fallback is supported on the V240m+ in standalone mode only for WiFi, GPRS and Bluetooth communication types. For example, if your WiFi connection is a primary connection and is lost, the next connection method available that has been setup (say GPRS) should be used to keep communications to Verifone gateway alive. Regarding the recovery […]
Verifone V240M Network Connection – Ethernet
To connect the terminal to other devices via Ethernet, RS-232 use the V240m+full feature base. The full-featured Base provides a standard RJ-45 LAN socket, RS-232 port, a mini-USB port. The V240m+terminal must be docked on the base to utilise cable connectivity.
Verifone V240M Paper Roll – Change/Replace
Use the following steps to replace Verifone V240M Paper Roll. Make sure 57mm x 40mm thermal printer paper roll is used. 1. Unlock the paper compartment by pulling up the latch and swinging the door downwards. 2. Load the paper roll as shown in below, with the edge of the paper on the top of […]
Verifone V240M Terminal Overview
This short guide provides you with a Verifone V240M Terminal Overview. Terminal front The V240m+includes the following features: • Capacitive touch LCD display and CTLS tap area • Smart card reader • Magnetic card reader • Integrated thermal printer • Secure keypad supporting 3×5 matrix containing 0-9, *, #, Cancel (Red), Backspace/Clear (Yellow), and Enter […]
Contactless Transaction Prompt to Insert Card
It is routine for a contactless card to require a further security check occasionally. If the card is used for a lot of contactless transactions, this should be expected. This prompt is to prove the customer is the genuine cardholder. Once the PIN is entered the counter will reset and the customer can begin using […]